Search Site

Miata Seat Bases for VW Pans - Pair

Be the first to review this product

Mazda Miata Seat Base Kits

If you are looking to fit some Miata Seats to your VW Based Kit Car or Buggy then these Miata / MX5 Seat Base kits are the way to go. Designed to make the Miata Seat a Flat Floor fit you can fit box section as required to get the angle you like.

  1. 2 x MX5 Universal Seat Base, 2mm mild steel with 4mm supports. ( Sheet thickness is approx imperial alternatives maybe used)
  2. 2 x MX5 Universal Seat Base under floor mounting plates, 3mm mild steel. ( Sheet thickness is approx imperial alternatives maybe used)
  3. 8x M10  Grade 8.8 x 30mm Zinc Bolts.
  4. 8 x M10  Zinc Washers.
  5. 8 x M10  Nyloc Nuts.
  6. 8 x M10  Grade 8.8 x 20mm Zinc Bolts.
  7. 8 x M10  High Tensile washers.

These kits retain the factory Miata / MX5 Seat Runners and will require that you remove your factory VW Seat runners from the floor.

The lower under floor plates will need to be cut and drilled to suit the location you put them. As long as you use at least 3" ( 75mm) under each bolt you will not have any issues with pulling out. Ensure you round teh corners off the plate you make to at least a 1/2" radius.

One Kit does two seats so a pair.

Additional Information
Brand No
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Back to top